Manual Home Elevator

Product name: manual home elevator
Item: Home Elevator(MRL)
FOB Price: $9000-$18000
Persons: 3-5
Speed: 0.4m/s,1.0m/s
Load: 260kg / 320kg / 400kg
Traction machine: Gearless
Machine Roomless(MRL)
Material: Painted steel, Hairline stainless steel, mirror, etched , Titanium gold, rose gold, golden recess, glass.
Brand Name: SAFEELEVATOR

Send InquiryChat Now
Product Details


S-FH02


Ceiling: LED lamp

Car wall: Glass, stainless steel frame

Controlling box: Integrate controlling box, stainless steel 

Handrail: Stainless steel flat handrail

Floor: PVC floor

图片7.jpg


S-FH25


Ceiling: LED lamp

Car wall: Wooden finish, stainless steel 

Controlling box: Integrate controlling box, stainless steel 

Handrail: Stainless steel wooden finish flat handrail

Floor: PVC floor

图片8.jpg


SF-H035


Ceiling: LED lamp, mirror stainless steel

Car wall: Wooden finish, mirror stainless steel 

Controlling box: Integrate controlling box, stainless steel 

Handrail: Stainless steel round handrail

Floor: PVC floor

图片9.jpg


S-FH47


Ceiling: LED lamp, mirror stainless steel

Car wall: Wooden finish, stainless steel, glass 

Controlling box: Integrate controlling box, stainless steel 

Handrail: Stainless steel round handrail

Floor: PVC floor

图片10.jpg


Elevator Knowledge Share

Installation of the guide shoes of the car

1.During installation, the four guide shoes of both the car frame and counterweight frame must be in the same vertical plane for fear of inclination of the car frame.

2.Elastic sliding guide shoes are applied to freight lift, and the interval between guide shoes is about 3mm. Sliding guide shoes are applied to passenger lift, and the gaps between the sliding shoes and the surface of the guide rail should satisfy the following requests: the gaps on both sides should be consistent, and the position of the guide shoes should be validated like this: when one side gap between the guide shoe busher and the guide rail is zero, the other side gap should be 0.5~1mm.


Installation of the lifting mechanism of the safety clamp

After the upper beam is installed, fix all the draw rods of the safety clamp on the upper beam. Install the switch of the safety clamp and adjust the switch to make the symmetrical actions on both sides in consistency. The action of the switch of the safety clamp must be reliable; the control circuit must be shut off by the switch immediately when the concerned mechanism of the safety clamp works. Then fix the draw rods with the wedges. In the end, check and adjust the related parts again when necessary.


guican factory.jpg

Hot Tags: manual home elevator, China, manufacturers, suppliers, factory, customized, price
Related Products
Inquiry

Copyright © Safeelevator Co.,Ltd All Rights Reserved.