Home > News > Content
About Automatic Moving Walks
- Jun 08, 2018 -

Automatic moving walks are used in places where people, such as shopping malls, airports, stations, docks, and gymnasiums are concentrated. The structure is similar to escalators. It is mainly composed of active pavement and handrails.

The elevator decoration will be classified into automatic moving walks as follows: 1. Classification according to the tread structure Pedal type, the passenger's standing tread is a moving walk made of metal or other materials on the surface with toothed grooves. Tape-type, passenger standing treads for the surface of the continuous steel strips covered with a rubber layer. Tape-type automatic moving walks operate with balance, but they are expensive to manufacture and use, and are suitable for automatic moving walk with high long-distance speeds. Second, according to the classification of handrail decoration Full transparent, refers to the handrail wall plate made of transparent glass made of automatic moving walk, according to the shape of the glass wall plate can be further divided into curved glass and flat glass.

As far as the handrail decoration is concerned, the transparent glass siding has a certain strength, and the transparent glass siding has a better decorative effect. Therefore, the automatic moving walk made of flat-plate full-transparent glass covers most of the siding. Translucent means that the handrail wall is translucent, such as handrails made of translucent glass. Opaque refers to a moving walk made of opaque metal or other materials. Since the handrail with the bracket is fixed on the upper part of the wallboard, the handrail belt makes a circular movement on the rails of the handrail bracket, so the opaque type has better stability than the full transparent type. Mainly used for subways, stations, docks and other high-traffic autowalks where people flow is concentrated.

Copyright © Safeelevator Co.,Ltd All Rights Reserved.